电气自动化专业毕业设计英文翻译模板.docx
![资源得分’ title=](/images/score_1.gif)
![资源得分’ title=](/images/score_1.gif)
![资源得分’ title=](/images/score_1.gif)
![资源得分’ title=](/images/score_1.gif)
![资源得分’ title=](/images/score_05.gif)
《电气自动化专业毕业设计英文翻译模板.docx》由会员分享,可在线阅读,更多相关《电气自动化专业毕业设计英文翻译模板.docx(7页珍藏版)》请在得力文库 - 分享文档赚钱的网站上搜索。
1、电气自动化专业毕业设计英文翻译模板 电气自动化专业毕业设计英文翻译 Computer control technology 1 Computer structure and function This section introduces the internal architecture of a computer and describes how instructions are stored and interpreted and explains how the instruction execution cycle is broken down into its various c
2、omponents. At the most basic level, a computer simply executes binary-coded results. For a general-purpose programmable computer, four necessary elements are the memory, central processing unit (CPU, or simply processor), an external processor bus, and an input/output system as indicated in Fig.3-1
3、A-1. Fig. 3-1A-1 Basic elements of a computer The memory stores instructions and data. The CPU reads and interprets the instructions, reads the data required by each instruction, executes the action required by the instruction, and stores the results back in memory. One of the actions that is requir
4、ed of the CPU is to read data from or write data to an external device. This is carried out using the input/output system. The external processor bus is a set of electric conductors that carries data, address and control information between the other computer elements. 1-1 The memory The memory of a
5、 computer consists of a set of sequentially numbered locations. Each location is a register in which binary information can be stored. The ”number”of a location is called its address. The lowest address is 0. The manufacturer defines a word length for the processor that is an integral number of loca
6、tions long. In each word the bits can represent either data or instructions. For the Intel 8086/87 and Motorola MC6800 microprocessors, a word is 16 bits long, but each memory location has only 8 bits and thus two 8-bit locations must be accessed to obtain each data word. In order to use the content
7、s of memory, the processor must fetch the contents of the right location. To carry out a fetch, the processor places (enables) the binary-coded address of the desired location onto the address lines of the external processor bus. The memory then allows the contents of the addressed memory location t
8、o be read by the processor. The process of fetching the contents of a memory location does not alter the contents of that location. Instructions in memory Instructions stored in memory are fetched by the CPU and unless program branches occur, they are executed in the sequence they appear in memory.
9、An instruction written as a binary pattern is called a machine-language instruction. One way to achieve meaningful patterns is to divide up the bits into fields as indicated in Fig. 3-1A-2, with each field containing a code for a different type of information. 0001 0101 1000 XXXX 0100 0001 1000 XXXX
- 配套讲稿:
如PPT文件的首页显示word图标,表示该PPT已包含配套word讲稿。双击word图标可打开word文档。
- 特殊限制:
部分文档作品中含有的国旗、国徽等图片,仅作为作品整体效果示例展示,禁止商用。设计者仅对作品中独创性部分享有著作权。
- 关 键 词:
- 电气 自动化 专业 毕业设计 英文翻译 模板
![提示](https://www.deliwenku.com/images/bang_tan.gif)
限制150内